• ENGLISH •
All manuals and user guides at all-guides.com
INSTALLING THE CAR SEAT IN THE VEHICLE
4.1 Installing the car seat in the vehicle
To secure the car seat in the vehicle with the 3-point seat belt, proceed
as follows:
A
Place the child restraint rear-facing on the,vehicle seat and make sure the
handles in specified position The child will face the rear of the vehicle.
Route the vehicle lap belt through both lap belt guides and buckle the seat belt.
Route thevehicle shoulder belt around the back of the child restraint and
through the shoulder belt guide.
If vehicle shoulder belt is too short, please move vehicle seat belt height
adjustment to the lowest possible height. If the vehicle belt is still too short,
try another seating position.
Adjuster the child restraint to the proper recline to ensure maximum
protection for the child. A tightly rolled towel under the front edge of the
child restraint can be used to achieve the correct recline.
WARNING:
DO NOT route the vehicle belt using any other path when using the child
seat. For assistant contact our Customer Service team.
DO NOT use 2 point vehicle belt to install this child seat.
ONLY install the child restraint rear-facing on forward-facing vehicle seats.
Make sure the child is properly secured in the child restraint, and the child
restraint is tightly installed in the vehicle.
43