Getting Started - Wiko HIGHWAY SIGNS Mode D'emploi

Getting Started

Inserting the SIM and micro SD cards
~
In order to use your telephone you need to insert your
SIM card. The slots are located on either side of the
mobile phone.
You may insert 2 SIM cards (1 Micro SIM + 1 Nano SIM),
or 1 Micro SIM + 1 microSD card.
The eject button is a small hole located in the tray door.
Insert the ejection tool supplied with the telephone
(or a small pin) into the eject hole and push fi rmly but
gently until the tray opens. On the left, remove the tray
and place the micro-SIM card. On the right, remove
the tray and place the nano-SIM card or the micro-SD
card. Place the trays back in the slot and gently insert
them into the mobile phone.