All manuals and user guides at all-guides.com
Usage
Adjusting Tilt Angle
The awning is already delivered with an optimally adjusted tilt angle. However, users can adjust the
screen angle within a range of 10° to 40°. A tilt angle smaller than 14° is not allowed – although the
construction of the adjustment mechanisms would allow a smaller angle.
Once the adjustment screw reaches its end position you may not turn it further. Do not force it!
Disobeying this instruction can lead to damage of the awning that can cause hazard and will void the
warranty!
Extend the awning no more than 1/4 of its full projection before adjusting.
Figure 7:
Users may adjust the screen angle within a range of 10° to 40°.
Use a 6mm hexagonal spanner for adjusting (figure 8). If you turn it clockwise, the tilt angle is being
increased.
It will damage the awning if the tilt angle is adjusted wrongly.
Extend and retract the awning
The awning can be extended and retracted by a crank handle included in delivery.
Figure 8:
With the help of the electric control unit you may open and close the awning. The first button is for swit-
ching on; the middle button is for stopping. The lower button is for closing the awning. If you do not use
the motor you may also extend and close the awning by using the crank handle. Please take care that
the cloth is stretched tightly. Ensure that the fabric is drawn in evenly when closing the awning in order
to prevent any damage.
open
open
stop
close
close
- 67 -