Safety Instructions - VANA SP1312 Notice De Montage

Safety instructions

To install this awning technical knowledge is necessary. Do not mount this awning yourself but contact
a professional workman for help if
• you are unsure if the awning can be mounted on the place you chose for installation.
• you do not understand the instruction manual or parts of it.
• you do not have necessary tools available.
• you do not have necessary technical knowledge
A minimum of two healthy adults are required to move and install the awning as the product is unwieldy
and heavy. Do not try to install the awning alone. If the awning falls, it could cause serious injuries and
damages! Contact an authorized craftsman for help.
Do not install the awning when you find damaged parts or if parts are missing. Contact your dealer.
Keep children and pets out of the working area during assembly and adjustments.
This product and its fixing parts are only suitable for installation on a plain cement wall or non-rendered
brickwork. If the wall/brickwork shows cracks you have to consult an expert.
If your building has an exterior shell (such as insulation, double brick wall, brick facing), installation
should be taken out by a professional craftsman.
Nobody is allowed to change the products' design and structure without the permission of the manufac-
turer or authorized deputy.
Please make sure that your hands are clean at the time of assembly; otherwise the awning fabric and
frame may get dirty.
The operation in frosty conditions may damage the awning.
The operation in snowy conditions may damage the awning.
In case of rain retract the awning. If the tilt angle is less than 14°, the awning may be damaged.
Nobody is allowed to climb onto the awning. Hanging anything on the awning is forbidden.
Sheeting was used to protect the paint. This must be removed afterwards.
When extended, various forces, including wind and rain, will affect an awning. These sometimes
substantial forces must be absorbed by the awning and transferred to the assembled structure via
its mounting brackets. Under extreme loads, excessive attractive force can be exerted on the anchor
bolts. Therefore, before starting assembly, check the load-bearing capacity of the mounting base and if
necessary take corresponding measures to ensure stable installation of the brackets.
If the mounting base is unstable, you have to consult a specialist.
All manuals and user guides at all-guides.com
- 61 -