Care Instructions - Baninni ROADTRIP BN513 Mode D'emploi

MANUAL
7.1 Removing / replacing the cover
Step1. Remove the belt system as described in point 5.1.
Step2. Remove the plastic pins from the back side of backrest. (see above picture). Then
press the backrest so far back so that it rests flat on the floor. Now you can remove the
cover of backrest.
Step3. Remove the backrest. Now the seat cushion cover can be pulled forward and
removed.
To replace the cover proceed in the reverse order to removing the cover.
7.2 Cleaning the car seat and cover
The seat cover, harness and plastic parts can be washed with very mild detergent and warm
water.
Do not use chemical cleansers, bleach or corrosives to wash any part of the car seat.
Do not wash by machine, Spin-dry or tumble-dry are not recommended.
Washing instruction for cover:
The cover is removable and washable at 30°,line dry only.
30℃
30°C
Handwash, Do not bleach
watertemperature
below 30°
8. PROCEDURE AFTER AN ACCIDENT
The child car seat must be replaced when it has been subject to violent stresses in
an accident.
9. PRODUCTSERVICE
Please contact the store from which the product was bought
All manuals and user guides at all-guides.com

CARE INSTRUCTIONS

P
Drycleen, any,
solvent except
trichioroethylene
Do not tumble dry Do not iron