Loosening The Shoulder Straps - Baninni ROADTRIP BN513 Mode D'emploi

MANUAL

5.3 Loosening the shoulder straps

5.4 Securing the child with the harness
Firstly, adjust the shoulder belts height (see point 4.1), proceed as follows:
Step1. Loosen the harness (see point 4.3), open the buckle (see point 4.4.1),
and place them down sideways.
Step2. Seat your child in the child car seat. Place both shoulder belts over your
child's shoulders. Fasten the buckle (see point 4.4.1).
A loose harness can be dangerous. Check the harness adjustment and tighten
each time the child is placed in the seat.
Ensure that any lap strap is worn low down, so that the pelvis is firmly
engaged, the belt is not twisted.
All manuals and user guides at all-guides.com
Step1. The shoulder straps are slackened by pressing
the lever (under the car seat cover) on the front of
the car seat.
Step2. Press down on the label marked "Press" as
you grip the two shoulder straps with your other
hand. Pull the shoulder straps towards you to loosen
it. (see left picture)
Step3. Pull the shoulder straps upwards to remove
the slack from the lap sections of the harness then
pull the adjuster strap until the harness is fully
tightened.(see left picture)
The harness should be adjusted as tightly as possible
without causing discomfort to your child.