Baninni ROADTRIP BN513 Mode D'emploi page 14

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

All manuals and user guides at all-guides.com
MANUAL
GB
CARSEAT BN513
INSTRUCTIONS
Group 1-2-3
Suitable from 9kg to 36kg
1. NOTES
Please read through these instructions carefully before using the child car seat for the
first time. The instructions can be retained on the child car seat for its life period in the
case of built-in restraints, and take good care of it for reference in the future .
1.This is a "Universal" child restraint; it is approved to Regulation No.44,04 series
amendments, for general use in vehicles and it will fit most ,but not all, car seats.
2.A correct fit is likely if the vehicle manufacturer has declared in the vehicle handbook
that the vehicle is capable of accepting a "Universal" child restraint for this age group.
3.This child restraint has been classified as"Universal" under more stringent conditions
than those which applied to earlier designs which do not carry this notice.
4.If in doubt,consult either the child restraint manufacturer or the retailer
ATTENTION: Only suitable if the approved vehicles are fitted with 3-point safety-
belts, approved to UN/ECE Regulation No.16 or other equivalent standards.
Do not use in passenger seats equipped with airbags (SRS).
1.1 Applicability:
The child car seat is suitable for group I,II,III (9 TO 36KG)
Group I : 9-18 kg
Group II: 15-25 kg
Grop III: 22-36 kg
This child car seat can be used with its harness system for children of group I. It must
be secured with the belt fastener on the 3-point vehicle belt.
For children of group II and III (15kg to 36kg) the harness system must be removed and
the vehicle's 3- point belt system be used to secure the child.
Only suitable if the vehicle is fitted with 3 point safety belts, approved to UN/ECE
Regulation No. 16 or other equivalent standards.

Publicité

Table des Matières
loading

Produits Connexes pour Baninni ROADTRIP BN513

Table des Matières