Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
ENG
Insert power cable
Connect the cable to the mains
Perform a function test before every use:
All LED's in the light cone must illuminate.
Switch the LED module on/off
Set the desired colour temperature according to
the following table:
COLOUR
COL. TEMP.
blue
cold white
orange
warm white
Set the desired Illuminance in 25% dimmer steps
22
RECOMMENDATION
Ideal for identifying
individual vessels for
wound follow-up
treatment and small
procedures
Ideal for various types
of skin examinations
5.3
Transport position
Only transport the light in this position.
6
DISINFECTION CLEANING
DANGER
Electric shocks are life-threatening
Switch off the power and secure against
unintended switching on before disinfectant
cleaning.
CAUTION
Damage to property caused by incorrect
cleaning
Use only disinfectants that will not affect the
functional capability of the light.
No
cleaning
agents
chlorine or abrasive products must be used.
Those agents can cause damage to the plastic
parts.
The cleaning and disinfection agents must be
suitable and approved for plastics like PC,
PMMA, PA and ABS.
Concentrated disinfectants may damage the
light.
Pay attention to the specifications from the
data sheet of the agent for concentration and
effectiveness time.
Unsuitable cloths can cause scratches.
CAUTION
Dirt decreases luminosity
Clean regularly to keep the screen clean.
Disinfection only by wiping is permitted.
Clean the PA screen with a non-abrasive
cleaning cloth and a suitable cleaning agent.
containing
solvents,
Publicité
Table des Matières
Dépannage
