TREND NETWORKS SignalTEK 10G Guide D'utilisation page 15

Transmission - VoIP Data Test
1. Connect both display and remote units to the network or cable under test
2. Pair the remote unit with the display unit via
status connection will light up blue once successfully paired
Set the link speed to Auto in the display unit via Settings - Network -
3.
RJ45 - Link Speed
4. Set up number of calls, frame loss type & Limit and test duration in VoIP
Data settings
5. Press Test key to run the test
6. Packet loss and jitter/delay info will be presented
7. Save the results
1
4
2
5
Settings - Pairing. The
3
6
Depend On Us
EN
15