Starting The Appliance Self-Test; Ending The Appliance Self-Test; Customer Service; Repair Order And Advice On Faults - Bosch KDN Serie Notice D'utilisation

Appliance self-test
Your appliance features an automatic
self-test program which shows you
sources of faults which may be repaired
by customer service only.

Starting the appliance self-test

1. Pull out the appliance plug or switch
off the fuse and wait 5 minutes.
2. Plug the appliance back in or switch
on the fuse and within the first
2 minutes press and hold freezer/
fridge button for 3 seconds until an
audible signal sounds.
The self-test programme will start.
If the self-test ends and an audible signal
sounds twice, your appliance is in
working order.
If 5 audible signals sound, there is an
error. Notify customer service.

Ending the appliance self-test

When the programme has ended, the
appliance switches over to normal
operation.
All manuals and user guides at all-guides.com

Customer service

Your local customer service can be
found in the telephone directory or in the
customer service index. Please give
customer service the product number
(E-Nr.), the production number (FD) and
the consecutive numbering (Z-Nr.) of the
appliance.
This information can be found on the
rating plate.Image .
This way you will help to prevent
unnecessary callouts and save the
associated additional costs.
Repair order and advice
on faults
Contact information for all countries can
be found on the enclosed customer
service list.
GB 0344 892 8979
IE 01450 2655
US 800 944 2904
en
Calls charged at
local or mobile rate.
0.03 € per minute
at peak. Off peak
0.0088 € per
minute.
toll-free
23