Electrical Hook Up - AEG Electrolux DH1690-M Notice D'utilisation

36 Electrical hook up of the hood

Electrical hook up

This appliance conforms to the European Directives 2006/95/EC (Low
Voltage Directive) and 2004/108/EC (Electromagnetic Compatibility).
When you install the appliance and carry out maintenance, it must be unplugged
from the power source or the fuses must be disengaged or removed. Electrical
hook up must be carried out before the appliance is installed in the cabinet.
Check that:
- the power source is sufficient,
- power cords are in good condition,
- the diameter of the cables conforms to installation regulations.
Attention
After having finished the installation of the hood, plug-in the unit, lift it and
remove the blocking panel (Fig. 14-15-16). Afterwards please open the panel
(Fig. 17-18) and remove the grease filter PVC protection (Fig. 19) and place
the filter back (Fig. 20).
All manuals and user guides at all-guides.com
fig.14
fig.15
fig.16