Front Panel; Back Panel - Fenton AV380BT Manuel D'instructions

FRONTPANEL
1. POWER: Press the switch to turn the
amplifier on/off.
2. BASS: Adjust the bass.
3. TREBLE: Adjust the treble.
4. VOLUME: Adjust the volume.
5. MIC.VOL: Adjust the volume of the
microphones.
6. INPUT: Press this button to switch between
AUX, USB/SD, FM and BT-input.
7.
PREVIOUS: Press the button shortly to play
the previous track. Press this button long to
reduce the volume.
BACKPANEL
15. AUX IN: Connect any stereo signal such as a
CD, TAPE, Mixer etc. to this input. To play a
signal connected to this input make sure the
AUX input is selected on the front panel (6).
16. MAIN SPEAKERS OUTPUT: Connect the
speakers to these connectors.
BT CONNECTION
First turn on the amplifier, press the "INPUT" button until BT LED lights up. Then use your mobile or other BT-
device and search the amplifier. When you find "AV380BT" then connect, no password needed. The amplifier is
only discoverable when input selected BT.
FM RADIO
Press the "INPUT" button to select FM LED lights up. Press the
automatically searching is finish you can switch between different frequency with
8.
PLAY/PAUSE: Press the button to switch
between play and pause function.
9.
NEXT: Press the button shortly to play the
next track. Press this button long to increase
the volume.
10. REPEAT: Press the button to repeat the
current track, all tracks or play random
tracks.
11. SD CARD: Insert your SD card into this slot.
12. USB: Insert your USB devices into this slot.
13. MIC1: Microphone input Jack 6.3mm (¼").
14. MIC2: Microphone input Jack 6.3mm (¼").
17. FM ANTENNA: FM antenna for radio
receiving.
18. 12V POWER: Input for power adapter
12V/5A, not supplied.
19. 230V POWER: Use the power lead for
connecting with AC power outlet
(8) button for automatic FM searching, when
4
.
or .