Maintenance Tips; Cleanings Fabrics; Replacement Parts - Zooper Ballet SL300 Easy To Go Mode D'emploi

Maintenance tips

After a few tough months on the streets the BALLET may begin to get dirty.
These tips will help you take care of your BALLET and keep a smooth ride.
Clean the chassis with a soft towel and lukewarm water and wipe out the
01.
remaining water with a dry cloth.
Use a soft brush to clean sand and dirt from the mechanisms and sliding
02.
tubes of the chassis. Take care to brush away from any joints.
Use a sponge, warm water and liquid soap to gently rub off any dirt on
03.
the handlebar foam. Wipe clean any soap residue left on the handlebar.
Use a brush and water to clean dirt or sand on the wheels.
04.
Periodically, remove the wheels from the chassis and brush off any dirt or
sand in the inside axle of the wheel.
Store your BALLET and its accessories in a dry place and leave them
05.
unfolded when wet to revent mould.
For more tips on how to maintain your BALLET, visit www.zooper.com.
The shoulder straps can be removed and reassambled between different shoulder
holes.
Cleaning the fabrics
The BALLET seat fabrics are detachable and hand washable.
When washing, do not forget:
Maximum temperature 30°C / 85°f (cold wash)
01.
Do not use bleach or aggressive detergents
02.
Use tumbler dry (low heat only)
03.
Do not dry clean
04.
Always wash separately
05.
Always check the fabric label before washing.
The BALLET underseat basket is non-washable, but can be wiped clean with a
domp cloth.

Replacement parts

Should you have any questions about your BALLET or should you need any
spare parts, please contact the specialist retailer from whom you have
purchased the BALLET.
All manuals and user guides at all-guides.com
15
www.zooper.com