WPool E35 INV Guide D'installation Et D'utilisation page 38

5.2 Setting the date and time
On the main interface, long press up or down to enter the password 022, then wait 2 seconds, select group
settings -> "v" and long press up and down to enter the clock settings
In the clock parameters press up or down to select the parameter. Then use the up and down arrows to change
the hour and minute settings. If no operation is performed for 5 seconds, the system will save the selected
settings and return to the settings interface.
The system will return to the
clock setting menu if you press
ON
Minutes
Press up or down ->
Press up or down ->
Hours
Press up or down
Setting value
38