Publicité
Les langues disponibles
Les langues disponibles
Package Contents
Bluetooth® Loudspeaker, Type C charging cable, 1x
3.5 mm jack cable, operating instructions and safety
instructions
Initial operation
NOTE
It is recommended to fully charge the integrated battery
before using the product for the first time.
Process:
1. Use the supplied Type C cable and plug the Type
C connector into the appropriate socket under the
protectivecover on the side of the product.
2. Now connect the USB plug of the charging cable to a
USB charging adapter or an active USB socket (e.g. laptop
or computer).
3. During the charging process, the status LED on the
device flashes red / blue. As soon as the battery is
fullycharged, it will glow red permanently.
The speaker automatically turns off when the
battery charge is less than 3%.
Modes and functions
LED code
Red flashing light
Red / Blue flashing light
Red / Blue light off
Power ON/OFF
• Press the POWER ON/OFF button until a short beep
sounds and the blue Status LED light turns on.
• Press the POWER ON/OFF button again until a short beep
sounds and the blue Status LED light turns on.
Pairing mode (Bluetooth® pairing)
1. Turn on the speaker as described above.
2. Search and select "LBS20" in the Bluetooth® settings
of your mobile device.
Meaning
Low battery charge (<10%)
Battery is charging
Battery is charged
Publicité
