Newteck CHIMNEY Mode D'emploi page 10

• Do not subject it to rough handling.
• In case of a breakdown or malfunctioning of the appliance,
disconnect it at once.
• Do not attempt to repair it, but take it to a service centre
approved by the manufacturer.
• If you decide you do not want to use this appliance any
longer, disable it by cutting the power cable - of course, after
disconnecting it from the socket.
• The power cable should be extended to its full lenght to avoid
over heating.
• If the power cable gets damaged, it has to be replaced only at a
service centre approved by the manufacturer.
• For safety reasons, the appliance should never be opened.
• The appliance has been designed and manufactured to operate
in the home.
• Any other use is considered inappropriate and dangerous.
• Do not insert objects through the safety grill or the air inlets.
• During use, rest the appliance on a flat surface.
• Do not place the appliance directly under an electrical socket.
• Do not use the heater close to sinks, bathtubs, showers and
swimmingpools.
• Do not use the heater in presence of flammable substances
(petrol, paints, etc.).
• Do not place the cord near sources of heat.
• In order to avoid a hazard due to inadvertent resetting of the
thermal cutout, this appliance must not be supplied through an
external switching device, such as a timer, or connected to a
circuit that is regularly switched on and off by the utility.
• This heating equipment is not provided with a device that checks
the room temperature. Do not use it in small spaces when
these are occupied by individuals unable to leave the room by
themselves, unless they are under constant supervision.
WARNING: DO NOT COVER THIS PRODUCT NEAR CURTAINS
OROTHER COMBUSTIBLE MATERIAL.
10