Ways Of Installation; C-Clamp Installation On The Desk - ONKRON G160 Mode D'emploi

1. Ways of installation

a)

C-Clamp installation on the desk

Fix the corner (B) to the base of the
bracket (A) with three screws (D) using
the key (I).
Depending on the thickness of the desk on which the bracket is installed, fix
the clamp (C) with two screws (D) using the key (I):
• In the upper and middle holes of
the corner (В).
D
B
min desktop thickness
max desktop thickness
:
С
= 10 mm (0.4")
= 53 mm (2")
џ Fasten the bracket to the edge of the
desktop with a clamp.
A
D
B
• In the middle and bottom
corner hole (B).
B
D
min desktop thickness
max desktop thickness
I
D
I
С
= 50 mm (1.97")
= 83 mm (3.27")
D
B
5