Choose How You Want To Install The Desk Mount; C-Clamp Installation On The Edge Of The Desk - ONKRON G140 Mode D'emploi

1. Choose how you want to install the desk mount:

a) C-Clamp installation on the edge of the desk:
• Take the C-Clamp (B), it consists of two details connected with two screws. If
your desk thickness is 1.3" – 3.1" (35~80 mm) use two lower holes, if 0.4" –
1.77" (10~45 mm) use two upper holes. Key (L) may be used.
• Put plastic cover (C) onto C-Clamp (B), as shown. Attach the tube (E) to the C-
Clamp (B) using three screws (H). Key (K) is needed.
• Install the whole construction onto the table and tighten the clamp, by
spinning the knob. Key (L) may be used. Make sure it is securely fixed on the
table.
C C
B B
4
35-80 mm
1.3" -3.1"
or
L
E
10-45 mm
0.4" -1.77"
H
K
L