T'nB HPARTJPN Mode D'emploi page 4

EN
BLUETOOTH SPEAKER
Instruction Manual
(Read before proceeding)
POWER
• Please charge your Bluetooth speaker fully before its first use.
• Operates using an internal rechargeable Lithium battery.
• To charge the battery:
• Using a Micro USB cable (included), insert the USB power cable into the
micro USB port located on the back of the speaker. Connect the other
end of the USB cord into a powered USB source such as a computer,
laptop or USB AC adapter (not included).
• When your Bluetooth speaker is charging, the indicator light will turn red.
• Once your Bluetooth speaker is fully charged, the red light will turn off.
PLAYING MUSIC VIA BLUETOOTH
• Turn your Bluetooth speaker on by sliding the power switch located
on the back of the speaker to 'ON' position.
• The indicator light will turn blue. This indicates that the speaker is in
pairing mode and is searching for your Bluetooth device.
• Make sure the Bluetooth function on your device is turned on.
• Search the speaker named "TNB SPEAKER".
• Once you have selected the speaker, your device will pair without
a password. (If your device prompts for a password, enter the
password"0000".
• Once your speaker is paired, the indicator light will begin to flash
blue slowly.
• Start playing music on your device. Make sure that you keep your
device within a 10 meter range of your Bluetooth speaker.
• Adjust the volume of your device to a comfortable level.
• Turn off the unit when not in use.
4