Remote control of the operating modes and programs of the device is possible with the Cozytouch
application available on App Store® or Google Play®.
The following accessories are required:
· A Cozytouch Bridge (to be installed on your Internet box)
· One Cozytouch Interface per device.
You can run your device in several modes:
• Comfort mode (
• Eco mode (
) which enables you to lower the temperature in your room when you will be away
from your home for a long time or during the night, especially in bedrooms.
• Programming mode (
ding to how a room will be occupied by means of a programming system (as an option).
• Frost mode (
ce of more than 24 hours, for example.
• Stand-by mode (
Control box
B
A
E
The energy-saving functions (please refer to page 29)
Activate airing detection : The operating instructions are for 7°C ±3°C for the whole time
that your room is being aired. When you close the window, your device will return to its initial operating
mode.
After 2 hours, the appliance starts heating again in any case.The maximum expected airing
period is 2 hours.
Activate absence detection: If your device detects no one in the room, it automatically low-
ers the temperature setting progressively to 3.5°C lower than the Comfort temperature setting.
Activate airing and absence detection : The two functions described above are activated.
Deactivate airing and absence detection : The energy-saving functions are deactivated.
After 2 minutes of inactivity, the light on consumption indicator goes out automatically.
Operation
) which enables you to have the right ambient temperature.
) which enables you to programme the Comfort and Eco modes accor-
PROG
) which enables you to maintain a temperature of around 7°C during an absen-
) which enables you to stop your device from heating.
C
D
A
Mode selection cursor
Control knob for the energy-saving
B
functions
Control knob for the Comfort tem-
C
perature
D
Consumption indication lights
E
Heating light
26