M Confort Eolus 70 Manuel De L'utilisateur page 21

- Cleaning of pre-filters:
The prefilters (4) are located on the sides and on the back of the equipment and can be
removed by pulling them upwards. They are cleaned by brushing them with a soft brush or
by placing them under a water tap until the dirt is removed.
- Cleaning of cooling filters:
Tools are required to remove the cooling filters, so we recommend that this procedure be
done by a technician.
- Equipment storage:
If you are not going to use the equipment for a long time, empty the reservoir through the
lower drain outlet. Once empty, replace the cap. Use the machine in ventilation function in
order to dry the cooler filter.
Once it is completely dry, store the equipment in a dry and ventilated place.
17