Lenze E82ZMBRB Instructions De Montage page 22

Scope of supply
Pos. Description
0
E82ZMBRB (Housing shell, pre−mounted brake switch E82ZWBRB)
1
2 screws M5 x 55 for motor mounting
2
2 screws M5 x 16 for motor mounting
3
2 screws M5 x 20
4
2 self−tapping screws 5 x 55 for wall mounting
5
2 self−tapping screws 5 x 18 for wall mounting
Mounting Instructions
I
Tip!
Current documentation and software updates concerning Lenze products can
be found on the Internet in the "Services & Downloads" area under
http://www.Lenze.com
0Fig. 0Tab. 0
© 2008 Lenze Drive Systems GmbH, Hans−Lenze−Straße 1, D−31855 Aerzen
No part of this documentation may be reproduced or made accessible to third parties without written
consent by Lenze Drive Systems GmbH.
All information given in this documentation has been selected carefully and complies with the
hardware and software described. Nevertheless, discrepancies cannot be ruled out. We do not take any
responsibility or liability for any damage that may occur. Necessary corrections will be included in
subsequent editions.
22
l
EDK82ZMBRB DE/EN/FR 1.0