Télécharger Imprimer la page

De Dietrich DRL1770EB Guide D'utilisation page 53

Réfrigérateur

Publicité

Les langues disponibles

Les langues disponibles

Troubleshooting
Warning! If there is any anomaly, unplug your appliance. Only a qualified electrician or
competent person may carry out troubleshooting.
If there is any anomaly during operation, check the following points before calling our approved after
sales service or a qualified professional.
ERROR
MEANING
TYPE
E01
Sensor warning
E02
Sensor warning
E03
Sensor warning
E06
Sensor warning
E07
Sensor warning
E08
Low voltage
warning
E10
Fridge
compartment is
not cold enough
E11
Fridge
compartment is
too cold
WHY
Power supply to the
device has dropped
to below 170V.
Likely to occur after:
- Long term power
failure.
- Hot food has been
left in the fridge.
Various
WHAT TO DO
Call Service for assistance as soon as
possible.
Call Service for assistance as soon as
possible.
Call Service for assistance as soon as
possible.
Call Service for assistance as soon as
possible.
Call Service for assistance as soon as
possible.
- This is not a device failure, this error helps
to prevent damages to the compressor.
- The voltage needs to be increased back to
required levels.
If this warning continues, an authorised
technician needs to be contacted.
1. Set the fridge temperature to a colder
value or set Super cool. This should remove
the error code once the required
temperature has been reached. Keep doors
closed to improve time taken to reach the
correct temperature.
2. Please empty the location at the front
area of air duct channel holes and avoid
putting food close to the sensor.
If this warning continues, an authorised
technician needs to be contacted.
1. Check if Super cool mode is activated
2. Reduce the fridge compartment
temperature
3. Check if vents are clear and not clogged
If this warning continues, an authorised
technician needs to be contacted.

Publicité

loading