Handling The Low-Energy Pot; Cooking With The Low-Energy Pot; Cleaning And Maintenance - Beem Chromalon Keramik Mode D'emploi

Chromalon Keramik

Handling the low-energy pot

Opening the lid
Hold both quick-lock handles (5) tightly
‹
and pull them outwards (image A1).
Lift the lid upwards.
‹
Closing the lid
Put the lid with the sealing ring onto the
‹
pot so that the lid is seated properly.
Press both quick-lock handles together
‹
towards the middle (image A2).
Inserting the sealing ring
Place the sealing ring evenly into the
‹
groove provided in the inner edge of
the lid.
Cooking with the
low-energy pot
Checking the valves
Check the safety valves before using each
time.
Look into the openings from below,
‹
leftovers or other objects may not clog
up the openings.
The valves must be cleaned if they are dirty
as described in the section Cleaning and
care (page 10).
10
All manuals and user guides at all-guides.com
‹
‹
‹
‹
‹
‹
Before cleaning, allow the low-energy pot to
cool down to avoid burning!
Low-energy pot
■
■

Cooking with the low-energy pot

Put the ingredients into the low-energy
pot.
Check that the sealing ring is correctly
seated as described in section Insert-
ing the sealing ring (page 10).
Close the lid of the low-energy pot as
described in the section Closing the
lid (page 10).
Put the low-energy pot onto the cooker
and switch it on to maximum level.
Reduce the heat supply when steam
escapes from the regulating valve (2).
Cooking then begins.
Opening the low-energy pot
To open the low-energy pot, loosen
the quick-lock handles and simply lift
off the lid as described in the section
Opening the lid (page
NOTE
► The glass lid (10) is not locked by the
quick-lock handles. It is simply placed
into the pot (image B).

Cleaning and maintenance

For cleaning, use a commercially avail-
able washing-up liquid and dry the low-
energy pot thoroughly.
Do not use abrasive cleaners or hard
sponges for cleaning as they may
scratch the surfaces.
BEEM - Elements of Lifestyle
EN
10).