Installation - Westinghouse QR0343 Manuel De L'utilisateur

Installation

INSTALLING THE DUCT SET
WARNING: This unit has sharp edges .
Always wear safety gloves during installation .
- Attach the duct set (B) to the range hood (A) with eight
screws (AA) .
INSTALLING THE DAMPER (IF NECESSARY)
WARNING: Sharp edges . Wear safety gloves .
CAUTION: Be very careful when installing the damper .
Applying too much force or not bending the damper enough
may damage or break the damper hinge ends .
The damper is pre-installed at the factory. Make sure that it has
not come loose during shipping and re-install it, if necessary.
- Insert one end of the damper (1) into the hinge slot (2) at the
top of the range hood (A) .
- Gently bend the damper (1) and insert its other end into the
hinge slot (2) .
A
A
11
Please contact customer.service@conglomkb.com or 1-877-333-0098 for further assistance.
1
2
AA
B
1s
CONGLOMKB .COM