Malfunction; Installation Instructions - PlasmaMade AAC37170 Manuel D'utilisation

7. Malfunction

Malicious repairs are dangerous. You have a chance of scratches and
abrasions when you disassemble the Air Cleaner. And you risk damaging
the device.
Error
Air Cleaner does
not work
If this does not solve the problem, please contact our helpdesk at
service@plasmamade.com | +31 (0) 522-468071

8. Installation instructions

•
Make sure the venturi is wide-side up. This is important for an optimal
operation of the PlasmaMade Air Cleaner.
•
Make sure that the PlasmaMade Air Cleaner is set up freely in the room. Do
not place the device directly against a wall.
•
Do not cover the PlasmaMade Air Cleaner.
•
This device is not suitable for rooms that are smaller than 20 m
•
Always ensure an adequate ventilation in accordance with the applicable
building regulations.
21
Repairing
•
Check the power connection of the device.
•
Temporarily disconnect the device from the
power supply (turn off the red switch and
pull the plug out of the socket).
•
Check the fuse.
venturi
2
.