Operating Instructions; Maintenance - PlasmaMade AAC37170 Manuel D'utilisation

5. Operating instructions

•
Connect the power cable to the air filter and plug it into the socket.
•
The PlasmaMade Air Cleaner has a red on / off switch that is located on the
back of the device. Here you will also find the plug contact for the power
cable and the micro fuse.
•
The PlasmaMade Air Cleaner has 2 power settings. The capacity at setting 1
3
is 200 m /h. The capacity at setting 2 is 400 m

6. Maintenance

The PlasmaMade Air Cleaner requires little maintenance.
If the outside of the Air Cleaner gets dirty, it can easily be cleaned with a damp cloth.
If the outlet grilles are somewhat soiled by, for example, dust deposits, you can
vacuum them with a vacuum cleaner.
The Pre filter should be replaced annually and the PlasmaMade Air Filter GUC1218
should be replaced every 5 years. You must take care of the disassembly and
assembly of the filter yourself, this also applies to returning the old filter. The next
pages describes how to replace the PlasmaMade Air Filter and Pre filter.
You can easily replace the ceramic foam by clicking it out of the grid.
For questions and remote assistance, please contact us.
3
/h.
18