PlasmaMade AAC37170 Manuel D'utilisation page 20

PlasmaMade Air Filter change
•
Pay attention! Make sure that the power plug is unplugged!
•
Remove the venturi;
•
Remove the 4 screws on the top of the housing;
•
Carefully remove the upper part and then the front of the housing;
•
Remove the total of 8 screws from the gray metal housing;
•
Remove the screw from the metal clamp and the mounting adapter;
•
The PlasmaMade Air Filter GUC 1218 can be lifted out upwards.
Prefilter change
•
Follow the first three steps above;
•
Pull out the Prefilter located under the metal housing;
•
Replace the Prefilter.
19
PlasmaMade Air Filter
GUC1218
Prefilter