3M 28825 Manuel D'utilisation page 7

Product Use: Many factors beyond 3M's control and uniquely within user's
knowledge and control can affect the use and performance of a 3M product in
a particular application. Given the variety of factors that can affect the use and
performance of a 3M product, user is solely responsible for evaluating the 3M
product and determining whether it is fi t for a particular purpose and suitable for
user's method of application.
Warranty, Limited Remedy, and Disclaimer: Unless an additional warranty is
specifi cally stated on the applicable 3M product packaging or product literature, 3M
warrants that each 3M product meets the applicable 3M product specifi cation at the
time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS,
EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY
OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR
ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING,
CUSTOM OR USAGE OF TRADE. If the 3M product does not conform to this warranty,
then the sole and exclusive remedy is, at 3M's option, replacement of the 3M
product or refund of the purchase price.
EU DECLARATION OF CONFORMITY
Name and address of the manufacturer and, where applicable, his authorised representative:
3M Co., Abrasive Systems Division
3M Center, Building 223-6N-02
St Paul, MN USA 55144
This declaration of conformity is issued under the sole responsibility of the manufacturer.
Product model/product (product, type, batch or serial number):
Description: 3M™ Angle Sanders, 1 5 HP, 12
Model Number: 28825, 88577
Serial Number Range: 80000-00 – 81999-99, where the first 2 digits represent the design of the unit,
the next 3 digits represent the sequence of manufacture, and the final 2 digits represent the yr of manufacture.
Object of the declaration :
Grinder with associated accessories
The object of the declaration described above is in conformity with the relevant Union harmonisation legislation:
Machinery Directive 2006/42/EC
References to the relevant harmonised standards used or references to the other technical specifications in
relation to which conformity is declared. References must be listed with their identification number and version
and, where applicable, date of issue:
Machinery Directive 2006/42/EC
EN ISO 12100:2010
EN ISO 11148-8:2011
EN ISO 28927-3:2009
EN ISO 15744:2009 List stds. and rev. dates
«F1»
3
Abrasive Systems Division
3M Center
St. Paul, MN 55144-1000 U.S.A.
www.3M.com/abrasives
28825-88577 030821
,000, 115 mm – 125 mm (4.5 in – 5.0 in)
List stds. and rev. dates
1 - 2
Limitation of Liability: Except where prohibited by law, 3M will not be liable for
any loss or damage arising from the 3M product, whether direct, indirect, special,
incidental or consequential, regardless of the legal theory asserted, including
warranty, contract, negligence or strict liability.
Submitting a Warranty Claim: Contact your dealer when submitting a warranty
claim in accordance with the restrictions listed above. Please note that all warranty
claims are subject to manufacturer's approval. Be sure to keep your sales receipt
in a safe place. This must be submitted when fi ling a warranty claim, within 1 year
from the date of purchase. For additional assistance call 1-800-362-3550.
Product Repair after Warranty Has Expired: Repair of 3M Abrasive Power tools
that are not under warranty is available through 3M or a 3M Authorized Tool Repair
Representative. Contact your 3M Abrasive Power Tool Distributor for details, or call
1-800-362-3550.
For 3M Product Information Call:
800-3M HELPS (800-364-3577) toll free
651-737-6501 direct dial
Where applicable, the notified body
Click to enter, name and number
performed
Click to enter, description of intervention
and issued the certificate:
Click to enter, name and certificate number
Where applicable, description of accessories and components, including software, which allow the radio equipment
to operate as intended and covered by the EU declaration of conformity:
Click to enter, description
Signed for and on behalf of:
03-08-2021
Betty Z. Mei
Technical Director
Location of Technical File
Document Holder
Mr. Ivan Hristov - Hardware
Development Engineer, 3M Germany
GmbH Carl-Schurz-Str.1, 41453
Neuss Germany
Original Language: English
«F1»
7
St. Paul, Minnesota, USA
Signature
Name of Signer
Title of Signer
Division/EBC/EBU Phone +49 2131 143058
ASD Global Systems Lab, 3M
Central Europe Region
2 - 2
3M and Scotch-Weld are trademarks of 3M Company.
© 3M 2022.
34-8715-6567-6