Kemper Pt1000 Instructions D'installation Et D'utilisation page 5

EN
About this manual
Content
About this manual
Safety instructions
Properties I Technical data
1
1.1 Properties
1.2 Technical data
1.3 Dimensions
2 Electrical connection
Manufacturer's address
Gebr. Kemper GmbH + Co. KG
Harkortstraße 5
57462 Olpe
Tel.: +49 2761 891-0
Web: www.kemper-olpe.de
After-sales service
Service hotline
Tel.: +49 2761 891 800
Email: anwendungstechnik@kemper-olpe.de
About this manual
Read this manual carefully before starting
assembly, use and maintenance and follow
the instructions! Retain the manual for later
reference!
Illustrations in this manual serve to aid basic
understanding and may differ from the actual
system configuration.
Liability
The manufacturer assumes no warranty or
liability in case of:
• failure to follow these instructions
• incorrect installation and/or use
• unauthorised modification of the product
• other improper methods of operation.
Use
The Pt 1000 temperature sensor is used to
5
measure system temperatures and log them
5
on a building management system (BMS), the
KHS Mini Control System MASTER 2.1, figure
6
686 02 008, or the CONTROL-PLUS hand-held
6
measuring device. The Pt 1000 temperature
6
sensor can be plugged into::
7
•
7
•
•
Only use the Pt1000 temperature sensor
Safety instructions
Be sure to read and follow the safety inst-
ructions in this manual. Failure to follow the
safety instructions can result in injury or even
death and in damage to property.
Labelling of important warning information:
© www.kemper-olpe.de – 05.2021 – K410014000007-00 – 5/20
Safety instructions
the socket of the MULTI-THERM
thermostatic balancing valve (figure 140
0G | 141 0G | 142 00 | 143 00 | 143 22 |
143 40 | 041 0G),
the measuring nozzle of the MULTI-FIX-
PLUS static balancing valve (figure 150 6G
| 151 06) and
the sensor pocket of the Multi-T adapter
(figure 128 0G).
- in sound condition.
- as intended.
Warning!
Indicates hazards that may result in
injury, damage to property or conta-
mination of drinking water.
Note!
Indicates hazards that may result in
damage to the Hygiene Flush Box or
malfunctions.