SilverCrest SWV 1166 A1 Instructions D'utilisation Et Consignes De Sécurité page 63

4. Connect an end device to the Wifi repeater
All manuals and user guides at all-guides.com
using WPS
• End devices are e.g. PC, mobile phone, tablet or IP
camera. Activate WPS on the end device according to the
manual of the device.
• Press the WPS button on the Wifi repeater for below
5 seconds.
• The devices will now connect. After about 2 minutes,
the connection works.
Under Router mode:
The switch 4 also allows you to set the device as Router.
Firstly insert the Internet line into WAN port.
Slide switch 4 on main unit to Router position, login to the
setting page.
52 GB / IE