Publicité
Les langues disponibles
Les langues disponibles
1. Connect the Wifi repeater to your Internet
All manuals and user guides at all-guides.com
modem via WPS (go to point 2 if your internet
modem does not have WPS).
• To connect your repeater by WPS to your modem, insert
the repeater in the power socket, wait 30 seconds, press
the WPS button of the repeater for over 5 seconds and
press the WPS button of your modem for 3 seconds.
In about a minute, the repeater should be setup, will restart
and become active.
2. Connect the Wifi repeater to your internet
modem without WPS
• Plug the Wifi repeater into a power outlet near your
Internet modem (not too far away from your modem!) and
wait 30 seconds for the repeater to start up.
• The Wifi repeater will need to know to which Wifi
network it should be connected and what the password is.
Therefore, it is necessary to set the Wifi. The Wifi repeater
comes with a network cable. Plug one side of the cable in
the Wifi repeater and plug the other end in your PC. You
may need to temporarily disconnect the existing internet
cable.
• Go to 192.168.10.1 in your web browser (do not use
Google, enter it in the URL bar).
• Enter admin in both the name and password field for the
first time login. Click "Login" button.
• The default menu language is English and you can select
your preferred language at the first setup page.
46 GB / IE
Publicité
