Sony DVCAM SDTI-CP DSBK-210 Manuel D'installation page 16

Table of Contens
Table of Contents
Overview ......................................................................... 16
Installation ...................................................................... 21
Overview
The DSBK-210 SDTI-CP Output Board is an optional board
for the Sony DSR-2000/2000P Digital Videocassette Recorder.
Installing this board in the DSR-2000/2000P allows connection
to an MPEG-supporting recorder (such as the MSW-2000/
2000P or MAV-555/2000), equipped with an SDTI-CP
interface.
The video signals output by this board comply with MPEG2
4:2:2 Profile @ Main Level intra-frame only encoding. It is
possible to select the bit rate as 50, 40, or 30 Mbps by a menu
operation.
Installing this board requires an upgrade to the DSR-2000/
2000P. For details, consult your Sony service representative.
..........................................................................................................................
1) SDTI-CP (SDTI Content Package) is based on the SDTI (Serial Data
16
Additional Menu Items ................................................. 17
Feed Playback Operations ............................................ 18
Components of the DSBK-210 ..................................... 20
Transport Interface) format (SMPTE 305M), and is an MPEG signal
transport format (SMPTE 326M) for content package transfer of
MPEG-ES and so forth, using data stream multiplexing.
1)