How To Use The Palm; First Use - Wintec MY STIM 2 Manuel D'utilisation

HOW TO USE THE PALM

First use

1.
2.
3.
4.
5.
6.
NOTE: Each program has a predefined duration time. The intensity resets to 0 when
the program ends.
26
Attach the electrodes to the cable and place them on the skin.
(See Placement of Electrodes chapter of this manual).
Turn the stimulator ON by pressing for three second the
ON/OFF key. The stimulator automatically shows the last
used program. The intensity indicator is positioned on 0 in
both channels.
Select the program you want to perform pressing the P+ or P-
key.
Increase the used channel intensity by pressing the arrow
of (L) switches
level, maintaining a pleasant feeling.
To decrease the intensity press the arrow
Increase the used channel intensity by pressing the arrow
of (R) switches
level, maintaining a pleasant feeling.
To decrease the intensity press the arrow
Every time you want to turn-off the stimulator, press the
ON / OFF key. It can be used as an emergency button.
It is forbidden the reproduction and the copy of this manual without written permission of producer. REV. ING. 11_10
Increase the intensity until the wished
Increase the intensity until the wished
.
.