Assembly - Hoover CRUISE BH52200 Mode D'emploi

Assembly:

Line up the connector on
the Reach Wand with the
Powered Nozzle. Push the
Reach Wand down onto
the Powered Nozzle until it
clicks into place.
1
WARNING
To reduce the risk of personal injury,
remove battery before cleaning or
servicing.
2
IMPORTANT
!
This vacuum cleaner is not free standing. In between uses or
when carrying out any maintenance always lie flat on the floor in
a suitable location so it does not become a trip hazard or can be
stepped on.
Push the Handheld
down onto the Reach
Wand until it clicks
into place.
3
!
The vacuum cleaner is not
free standing and in between
uses must always be placed
in the wall bracket or laid
flat on the floor, in a suitable
location so it does not
become a trip hazard or can
be stepped on.
7