Hoover CRUISE BH52200 Mode D'emploi page 20

Maintenance:
Removing and replacing the brush roll.
1
3
WARNING
Risk of personal injury – the brush roll may suddenly restart. Turn power switch Off and
remove the battery before cleaning or servicing the brush roll.
20
Slide to release the brush roll. The
button can not be removed.
Clear any threads or hair from both
ends of the brush roll and any dirt/
debris inside the housing of the
Powered Nozzle.
!
Lift left end of brush roll
first to remove.
2
When re-fitting the brush roll fit
the right side into the housing first.
Then line up left end of brush roll
and slide into place. Ensure that the
brush roll release button slides back
into place to secure the brush roll.
4