Termozeta SUPER Mode D'emploi page 15

• Take up a comfortable position for holding the appliance. This will also
help you to cut more accurately.
HINTS FOR CUTTING
The haircutter is very easy to use. But it is anyway advisable to get in
a little practice to have a perfect cut and to achieve the best results.
We therefore suggest you leave the hair a little longer for the first few
times you cut it, then gradually start cutting a bit shorter.
Blade control lever (3)
The blade control lever is located above the 0/1 switch, so that it can
be used easily while you are holding the
appliance in your hands.
The work of the lever is to be able to slightly
change the length of the cut, so that it can
be tapered, without having to replace the
comb accessory.
When the lever is turned upward (fig. C1)
the blades give you a shorter cut. Pressing
the lever downward (fig. C2) you will
gradually diminish the length of the cut.
Cutting hair with the comb accessories provided
Make sure the plug is disconnected from the outlet before starting to
assemble the accessories.
Choose the comb with the right size (fig.
B), fit it into the upper part of the blade
keeping the teeth turned upward and press
it at the bottom until it is hooked in (fig. D).
Completely unwind the feeding cable.
Plug into the outlet and set the ON/OFF
switch (4) to (I) to start up the appliance.
Try out each single comb accessory on a
C
C1
D
ENGLISH
C2