Publicité
Les langues disponibles
Les langues disponibles
◈ Product Specifications
Item
Printing Method
Direct Thermal printing
Printing Speed
Up to 127 mm/s (5 ips)
Resolution
203 dpi
10 SLCS Resident Bitmap Fonts
One SLCS Resident Scalable Font
16 BPL-Z™ Resident Bitmap Fonts
One BPL-Z™ Resident Scalable Font
Font
7 BPL-C™ Resident Bitmap Fonts
23 Code Page
Unicode supported (UTF-8, UTF-16LE, UTF-16BE)
1D: Codabar, Code 11, Code 39, Code 93,Code 128, EAN-13,
Printing
Barcode
2D: Aztec, Codablock, Code 49, Data Matrix, MaxiCode,
SLCS, BPL-Z™, BPL-C™
Emulation
*RFID command is supported only in SLCS and BPL-Z™
Gap Sensor, Black Mark Sensor,
Sensor
Media Cover Open Sensor, Peel-off Sensor
Cutter Type
Tear-bar
Language
User language supported
Frequency
UHF, 865~868MHz(EU), 902~928MHz(KR, USA)
RFID
Protocol
ISO 18000-6C(EPC Class1 Gen2)
Media Form
Media Type
Media
Diameter
Max. Ø66 mm (2.60 inch)
Width
50~112 mm (1.97~4.41 inch)
Thickness
◈ Printer Cleaning
Sensor (B)
1) Turn off the printer and disconnect all cables from the product.
2) Open the media cover and remove any media inside.
3) Clean the printhead (A) using the cloth or cotton swab soaked in alcohol for medical.
4) Using the cloth or cotton swab soaked in alcohol for medical, remove the media dust
from the black mark sensor (B). (Sensor could be located in the middle or on left or on right)
5) Do not use the printer for one to two minutes after cleaning until the alcohol for medical
has completely evaporated and dried.
6) Insert the media and close the media cover.
• The head is very hot while the printer is running.
When cleaning the head, be careful not to touch the heating part of the head with your hands.
• The head may be damaged by static electricity, etc.
• Be careful not to scratch the head.
• Be sure to use only genuine linerless media supplied by Bixolon.
Otherwise, post-sale support may not be available.
• Be sure to turn off the power before you proceed with cleaning.
• When using linerless media, clean the head periodically after using 4 rolls of media (100 m) or
at least once a week. Otherwise, the product may fail and print quality may be compromised.
◈ WEEE
This marking shown on the product or its literature, indicates that it should not be disposed
of with other household wastes at the end of its working life. To prevent possible harm to
the environment or people from uncontrolled waste disposal, please separate this from
other types of wastes and recycle it responsibly to promote the sustainable reuse of
material resources. Household users should contact either the retailer where they
purchased this product, or their local government office, for details of where and how they
can take this item for environmentally safe recycling. Business users should contact their
supplier and check the terms and conditions of the purchase contract. This product should
not be mixed with other commercial wastes for disposal.
◈ RFID Tranponder
This is how the printer sets the optimal position of the RFID Transponder when performing RFID read/write. For
details, refer to the RIFD Programming Manual. Utility programs and manuals can be downloaded from the
BIXOLON website (www.bixolon.com). If the RFID transponder position is set incorrectly and the RFID coding is
not done correctly, you need to reset the position of the RFID transponder in the utility program or the printer
LCD menu.
◈ Battery Safety Precautions
1. If the battery is not charged after the charging time, stop charging and contact the seller.
2. Store and use the battery where it will not come into contact with liquid (water, salt water etc.). There may be
a risk of overheating, rupturing or igniting.
3. Avoid exposing the battery to high temperatures over 50 ℃ and do not store or use it in a place with high
temperature and humidity. There may be a risk of overheating, rupturing or igniting. In addition, it may reduce
the performance and life of the battery. There is a risk of explosion, especially when the battery is placed by a
fire or stored near a heating device (e.g., heater, etc.).
4. Be sure to only use an adapter or charger approved by us to charge the battery. Use of any other adapter or
charger may reduce battery performance and life, or cause a risk of overheating, rupturing or igniting.
5. Avoid causing any strong impact to the battery or throwing it. The protective device inside the battery may be
damaged, which may reduce the battery performance and life, or there may be a risk of overheating, rupturing
or igniting.
6. Do not disassemble or modify the battery. The battery contains safety and protection devices to prevent
danger. It may reduce battery performance and life due to damage, or there may be a risk of overheating,
rupturing or igniting.
Description
EAN-8, Industrial 2-of-5, Interleaved 2-of-5,
Logmars, MSI, Plessey, Postnet,
GS1 DataBar (RSS-14), Standard 2-of-5,
UPC/EAN extensions, UPC-A, UPC-E, IMB
MicroPDF417, PDF417, QR code,TLC 39
Label media
Linerless media
Thermal Media
Thermal Media
Max. Ø66 mm (2.60 inch)
50~112 mm (1.97~4.41 inch)
0.07~0.19 mm
0.08 ± 0.01mm
Printhead (A)
◈ Safety Precautions
Do not connect multiple products to one single power outlet.
Do not connect the product to a loose power outlet.
Use only power outlets that meet the standard.
Connect the power cord only to a grounded power outlet.
• Noncompliance may cause electric shock or fire.
Do not touch the power cord with wet hands when pulling it from a power
outlet.
If the power plug or outlet is smeared with extraneous matter, wipe it with
a dry cloth.
• Noncompliance may cause electric shock or fire.
Do not bend or strain the power cord excessively.
Push the power cord all the way into the power outlet lest it remain
loose.
Make sure to hold the cord tight when separating it from the power
outlet.
Do not remove the power cord while the product is in use.
• Noncompliance may cause electric shock or fire.
Do not allow the product to be damaged by heavy objects.
• Noncompliance may cause electric shock or fire.
Use only authentic products from BIXOLON.
• The company will not provide post-sale support for damage or other
quality issues that any fake (refurbished) products may incur.
Keep small accessories or other packaging materials away from young
children.Beware: children may swallow them.
• Mishandling the product may incur injuries.
• If a child has swallowed any such thing, see a doctor at once.
If the product emits a strange sound, burning smell, or smoke, turn off the power
immediately and unplug the power cord.
If the product is dropped or its exterior is damaged, turn off the power immediately and
unplug the power cord.
Do not subject the product to shock.
• It may start a fire.
• It may damage the product.
Install the product in a fixed place preventing it from tipping over.
When moving the product, turn off the power and disconnect all cables
connected to the product, including the power cord.
Do not drop the product when lifting and moving it.
• It may damage the product.
Never disassemble, repair, or modify the product at your own discretion.
• When repair is necessary, contact the place of purchase.
Do not let any foreign substances enter the product.
Do not place heavy objects, liquids, or metals on the product.
• It may start a fire.
• It may damage the product.
Install the product in a well-ventilated place by keeping it a certain distance
from the wall.
The product installed in certain places such as where a lot of fine dust is
generated, where the temperature is too high or too low, where there is a lot of
moisture or water, and at airports or stations that are used continuously for a
long time may suffer serious quality problems due to the influence of the
surrounding environment.
• An increase in internal temperature may start a fire.
• Be sure to contact the place of purchase before installing the product.
If there is a problem with the product, please contact the place of
purchase. In addition, Bixolon website (http://www.bixolon.com)
provides product repair videos.
BIXOLON Co., Ltd.
● Website http://www.bixolon.com
● Korea Headquarters
(Add.) 7~8F, (Sampyeong-dong), 20, Pangyoyeok-ro241beon-gil, Bundang-gu, Seongnam-
si, Gyeonggi-do, 13494, Korea (ROK)
(Tel.) +82-31-218-5500
● U.S. Office
(Add.) BIXOLON America Inc. 13705 Cimarron Ave Gardena, CA 90249
(Tel.) +1-858 764 4580
● Europe Office
(Add.) BIXOLON Europe GmbH, Tiefenbroicher Weg 35 40472 Düsseldorf
(Tel.) +49 (0)211 68 78 54 0
© BIXOLON Co., Ltd. All rights reserved.
Publicité
