Telefunken L32F125U3C Mode D'emploi page 41

Viewing the Connections
Connector
SIDE AV
SIDE AV
HEADPHONE
PC to YPbPr
NOTE: When connecting a device via the Side AV input, you must use the supplied connection cables to enable connection.
See the illustrations above. YPbPr can be used only when you connect a device that has a YPbPr output through the PC input
with YPbPr to PC cable (YPbPr to PC cable is not supplied). When the connection is made, switch to YPbPr source. To enable
PC audio, you will need to use PC/YPBPR AUDIO CONNECTION WHITE & RED inputs. If an external device is connected via
the SCART socket, the TV will automatically switch to AV mode. When receiving DTV channels (Mpeg4 H.264) or while in Media
Browser mode, output will not be available via the scart socket. When using the wall mounting kit (optional), we recommend
that you plug all your cables into the back of the TV before mounting on the wall. Insert or remove the CI module only when
the TV is SWITCHED OFF. You should refer to the module instruction manual for details of the settings. Insert the CAM and
then the viewing card to the slot that is located in the terminal cover at the rear side of the TV. The module should be correctly
inserted, it is impossible to insert fully if reversed. The CAM or the TV terminal may be damaged if the CAM is forcefully inserted.
Type
Scart
Connection
(back)
VGA
Connection
(back)
PC/YPbPr
Audio
Connection
Side Audio/Video
(side)
Connection Cable
(Supplied)
HDMI
Connection
(side&back)
SPDIFF
Connection
(back)
Side AV
Connection
AV Connection
(side)
Cable (supplied)
Headphone
Connection
(side)
YPbPr Video
Connection
(back)
PC to YPbPr Connection Cable (Not supplied)
USB
Connection
(side)
CI
Connection
(side)
English - 40 -
Cables Device
PC Audio Cable
(Not supplied)