peerless-AV SUF661 Installation Et Montage page 9

OPTIONAL: Securing Locking Arm
CAUTION
• Be careful not to pinch fi ngers when adjusting
locking arm (B).
WOOD STUD: Adjust locking arm (B) until it aligns
4
to wood stud and secure using one #10 x 1-1/2"
security wood screw (R). If locking arm is diffi cult
to adjust, spin arm to loosen joint.
CONCRETE/CINDER BLOCK: Adjust locking arm
4
(B) to desired position, mark center of mounting
hole, and drill one 1/4" (6mm) dia. hole to a
minimum depth of 2". Insert alligator anchor (S)
into hole and secure locking arm (B) with one #10
x 1-1/2" security wood screw (R). If locking arm is
diffi cult to adjust, spin arm to loosen joint.
All manuals and user guides at all-guides.com
B
B
9 of 29
All other brand and product names are trademarks or registered trademarks of their respective owners.
DISPLAY
R
A
DISPLAY
S
R
A
ISSUED: 04-01-11 SHEET #: 203-9029-2 07-27-11
© 2011, Peerless Industries, Inc. All rights reserved.
Peerless Industries, Inc.
2300 White Oak Circle
Aurora, Il 60502
www.peerlessmounts.com