Kenwood IH100 Mode D'emploi page 3

●
Do not use this appliance as a hot
plate.
●
Do not use the induction hob to heat
anything other than food in suitable
pans.
●
Never use with pans that are empty.
●
In the unlikely event of the contents
of the pan catching fire: turn off the
appliance, smother the pan with a
damp cloth and leave to cool
completely prior to handling the pan.
●
As with all hobs, in the event that
cookware is accidentally overheated
and allowed to boil dry, it is
important that before moving from
the induction hob the heat source be
turned off and the pan allowed to
cool.
●
Overheating should be avoided at all
times. Persistent overheating can
cause permanent damage to your
cookware.
●
Do not place credit cards, magnetic
media or sensitive electronic
equipment near to the appliance
when in use.
●
Do not use the appliance outdoors.
●
During operation, the induction hob
should be placed horizontally, on a
flat heat resistant surface, at least
10cm away from all sides of the wall.
●
Do not let infirm people use the
appliance without supervision.
●
Do not let children use or play with
the appliance.
●
Only use the appliance for its
intended domestic use. Kenwood
will not accept any liability if the
appliance is subject to improper use,
or failure to comply with these
instructions.
suitable cookware
●
Only use flat bottomed pans that are
suitable for induction hob use. If in
doubt, check with the manufacturer
of your pans. If they are unsuitable
the induction hob will not detect the
pan.
●
The induction hob is suitable for
pans with a base diameter of
12 – 22cm.
●
Metal cooking utensils are not
recommended since they can be
heated through the induction hob if
left in the pan during cooking.
before plugging in
●
Make sure your electricity supply is
the same as the one shown on the
underside of your induction hob.
●
This machine complies with
European Economic Community
Directive 89/336/EEC.
before using your induction
hob for the first time
Wipe over the hob plate see 'care &
cleaning'.
key
hob plate
pan guide
control panel
LED display
timer decrease button
timer increase button
timer button
on/off button
power control
using your induction hob
1 Plug in the induction hob. The
appliance will beep and the fan will
operate for a second.
2 Press the on/off button
button will flash and the LED display
will read ––:––. It will remain with
this reading unless in timer mode.
The appliance is now in standby
mode.
3
, the