Klarfit Luxor Instructions page 9

ASSEMBLY INSTRUCTIONS
Note: You will find a video on how to set up the unit on the enclosed DVD.
General instructions
• Choose a suitable place to set up your pole dance pole. Make sure that
there is sufficient distance around the pole to walls, steps, windows and
obstacles of all kinds. Your arm span with your arms outstretched will give
you a clue. For your safety, the pole should be placed in the centre of a
circle of at least 3-3.5 m in diameter.
• Ceiling and floor must be stable and able to withstand pressure at the
assembly site. Especially in old buildings, make sure that you do not set up
the pole dance pole under ceiling voids.
Calculation of the height / calculation of the necessary extension pieces
Ceiling height Which extension piece
in mm
2235 - 2375 No extension piece
2360 - 2500 125 mm
2485 - 2620 250 mm
2610 - 2745 250 mm + 125 mm
2735 - 2870 500 mm
2860 - 2995 500 mm + 125 mm
2985 - 3120 500 mm + 250 mm
3110 - 3245 500 mm + 250 mm + 125 mm
3235 - 3310 1000 mm
The pole dance bar is suitable for ceiling heights of 2235 - 2375 mm when
assembled (without using the extension pieces). For greater heights, please
use the extension parts as well as the adjustment piece together with the
cover. Note the table above. The safety limit is 140 mm. This is the maximum
extension that the pole offers additionally without using the extension pieces.
More extension pieces?
no
no
no
no
yes
yes
yes
yes
yes
EN
9