alpex / turatec-pipes
Multi-Layer Composite Pipe
alpex / turatec Multi-Layer Composite Pipes suitable
for potable water and heating systems.
alpex-therm XS Multi-Layer Composite Pipes
suitable for heating systems.
Application and installation:
alpex PEX/AL/PE
n
maximum operating temperature: 95°C
turatec PER/AL/PERT
n
maximum operating temperature: 70°C
maximum operating pressure: 10 bar
n
have to be installed without mechanical influen-
n
ces such as bending, tension, torsion and residual
stresses, etc. (tension-free)
have to be installed parallel in the floor construc-
n
tion on bearing, plain subfloor
have to be fixed in the floor construction at straight
n
sections of 1 meter as well as before and after
changes of direction
can be overcrossed by a pipe bending under
n
consideration of the notice bending radii
pipe connections must not be used as fixed point
n
for the bending process
for the connection a straight pipe end has to be used
n
Bending radii
Nominal
diameter (mm)
14 x 2
16 x 2
18 x 2
20 x 2
Nominal
diameter (mm)
26 x 3
32 x 3
40 x 3,5
50 x 4,0
63 x 4,5
Bending radius
without using tools
5 x d o
Bending radius with using
bending tools
3,6 x d o
3,6 x d o
4,0 x d o
4,0 x d o
4,0 x d o
Bending radius with using
bending spring
2,0 x d o
3,0 x d o
|
FRÄNKISCHE
BUILDING TECHNOLOGY