Performing Treatment; Applications; Positioning Appliance On Customer; Rules For Working - exonda Trockenhaube M50 Mode D'emploi

Performing treatment

Hood Air dome
Control panel
ON/OFF switch
Drying time Operating lights
8. Performing treatment
8.1

Applications

- Drying roller hairstyles, pre-drying, air-drying
- Thermal support of cosmetic hair treatments (with plastic cover cap).
8.2

Positioning appliance on customer

• Adjust appliance to the desired height:
- Position the appliance at a level from the forehead to the nape of the
neck such that the hood covers the hair of the customer.
- The face and eye areas must be outside the hood.
- The distance between the rollers and the air dome should be equal on
all sides.
So that your customers are comfortable
• For sensitive customers, turn down the temperature and blower setting.
• Inform your customers that they can interrupt the treatment by pushing
the hood upwards with both hands and moving forward out of the appli-
ance.
8.3

Rules for working

• The selected treatment duration, temperature and blower setting are your
responsibility as a professional hairdresser.
• The exposure time of the products also depends on the treatment tempera-
ture selected, and must be taken into account by you as a professional
when determining the temperature setting required for the product used.
- You must also comply with the manufacturer's instructions for the prod-
ucts used.
- Take into consideration that the exposure times for the products may
change as a result of heat.
• Always monitor the treatment results already achieved.
8.4

Switching on the appliance

1. Connect the appliance to the mains.
2. Switch appliance on using the ON/OFF switch.
- The display for appliance settings and the operating lights will be lit on
the control panel.
- The appliance is now ready to use (the setting for drying time and the
operating lights flash very slowly).
GB
29