Lavorwash GV 8.0 T PLUS Mode D'emploi page 14

ADDITIONAL RISKS
In order to work in the maximum safety conditions
and to avoid any dangerous situation and acci-
dent, the operator must follow the operating in-
structions and regulations listed below.
- If the machine must be disarmed immediately for
any reason whatsoever, turn the main switch to
the OFF position.
- During the machine functioning, it is strictly for-
bidden to remove the safety devices assembled
by the builder on the machine in order to protect
the operator while performing his tasks.
- Only skilled and qualified operators can use the
machine.
- Never leave the machine unattended.
- To work, the machine requires only one operator.
- It is obbligatory to wear protective glo-
ves when using the machine.
- It is obbligatory to wear protective gog-
gles when using the machine.
WARNING ABOUT THE ADDITIONAL
The following warning plates are applied to the ma-
chine:
WARNING Danger from hot steam.
WARNING Danger of scalding
RISKS
TECHNICAL CHARACTERISTICS
TECHNICAL DATA
(see technical data plate)
• Supply: 3PH 400V 50Hz
(low voltage handle, 18V)
• Installed power: 800 W
• Boiler capacity: 5 litres
• Water tank capacity: 5 litres
• Boiler water supply system: continuous
automatic pump
• Steam pressure: 9 bar
• Steam temperature in boiler: max. 175°C
• Measurements in cm: 62 x 40 x 86
• Empty weight: 37 Kg
• Weight with accessories: 39 Kg
NOISE EMISSION
Noise emission readings for the generator during
the steam discharging phase and with the vacuum
in operation are equal to 89 dBA, understood as an
equivalent level (Leq).
During the machine's operation, it is recommended
to wear suitable acoustic protection devices (ear-
plugs, ear-muffs).
ADVANTAGES
Steam at 175° C cleans and sterilises all surfaces
perfectly. This machine is especially suitable for
removing greasy dirt because it melts the substance
making removal easy with micro fibre cloths or by
vacuum cleaning. When used correctly, this machine
can reduce detergent use by more than 80%, and
disinfectants by over 90%, thus resolving drainage
problems.
This system also reduces labour time by 30%. This
generator is a professional machine with high
quality components that comply with all main
international safety standards. The certified boiler
is built in high resistance stainless steel. The steam
hose connections are equipped with a double safety
block and are manufactured from an original design
using specially resistant materials.
14