GARDY SHELTER PRIMO 302028 Notice De Montage page 32

ENGLISH
CODES PART DESIGNATION
A Front lower half of the small board
B Back half of the board
H1 Side board
Start the assembly with the 5 lower boards: the two front lower boards (part A), the back
board (part B) and the first two side boards (part H1) with the pegs facing up. Assemble them
to form the base frame.
It is best to use a rubber mallet and especially a mounting wedge to assemble the boards.
Place the mounting wedge on the tongue of the board and hit it with the mallet until the
board is completely in place.
The concrete slab must be perfectly straight. You can easily check it with the spirit level.
DIMENSIONS (MM)
28 x 48 x 765 mm
28 x 48 x 2980 mm
28 x 95 x 1980 mm
QTY
2
1
34
32