Troubleshooting; Transport And Storage - voss.pet fenci M03 Mode D'emploi

INSTRUCTION MANUAL VOSS.PET FENCI
10

TROUBLESHOOTING

NOTICE
► Do not make any improper changes or modifications to the device.
► Never open the housing. Contact the Service department if repairs are
required.
If the device malfunctions or is found to be defective in any other way, even after the
solutions suggested below have been followed, contact the Service department. You
will find the contact details in section 15.
Fault/problem
Device not working/
LED not illuminated
Voltage loss/leakage
from the fence
Fence voltage
insufficient
Poor grounding
Indicator LED lights up
red
11

TRANSPORT AND STORAGE

NOTICE
► Before transporting the device, pack it in a way that protects it against impacts.
Ideally, you should use the original packaging.
► Store the device at an ambient temperature of between ‑10°C and +40°C and
protect the device against moisture.
41205 | 12 | 2020 | V3
Solution
ऀ Check whether the device is working (see section 7.2).
ऀ Check the socket used. Contact specialist personnel if
repairs are required.
Remove vegetation from the fence (mow, cut back).
Fence too long in length. Reduce the area or use a more
powerful energiser.
ऀ Follow the tips given in section 7.3.
ऀ Grounding rod corroded. Remove grounding rod.
ऀ Defective cables/connections. Replace defective parts.
VOSS�pet fenci M09
Fence voltage is below 3000 V. Check your fence for possible
defects.
DE
EN
EN
FR
IT
NL
SV
ES
PL
35