Publicité
Les langues disponibles
Les langues disponibles
8570533
TRANSPORTATION
WARNING! Transport the plate compactor with an empty
fuel tank or with the fuel shut-off valve secured in the
OFF position.
1.
Allow the engine to cool before transporting to prevent
burn injuries or a fire hazard.
2.
Do not attempt to load the plate compactor onto a
vehicle by yourself. Use a crane or additional people to
assist in loading/unloading. The tool is heavy and may
cause a back injury.
3.
Do not hold the plate compactor by the handle while
loading as it may swing open and cause an impact injury.
4. Secure the tool upright to prevent it from moving or
toppling over during transportation. The tool is heavy
and can cause a crushing injury if it falls over onto the
user or a bystander.
5
Transport the tool in the upright position. Turn all valves to
the OFF position. Ensure all caps are in place and sealed
tight to prevent spills if it should fall over during
transportation.
5.1 Remove fuel from the engine's fuel tank when possible
before transportation.
6.
Do not transport with the engine's spark plug facing down.
Transporting with the spark plug down will result in hard
starting and/or engine smoking.
DISPOSAL
Recycle a tool damaged beyond repair at the appropriate facility.
Contact your local municipality for a list of disposal facilities
or by-laws for electronic devices, batteries, oil or other
toxic liquids.
IMPORTANT! DO NOT pollute the environment by allowing
uncontrolled discharge of waste oil.
16
JPC60 Plate Compactor
For technical questions call 1-800-665-8685
V1.2
Publicité
