Configuration Of The Readjustments In Calibration; Technical Parameters - Giropes Baxtran BR 15 Manuel D'utilisation

9. CONFIGURATION OF THE READJUSTMENTS IN CALIBRATION

1. When the user is in the normal mode of weighing, he must press the keys
on the display.
2. Press the keys
* ECF-1 CALIBRATION OF ZERO + WEIGHT
Press the key
Press the key
Press the keys
Press the key
Place the weight of calibration on the platform and press the key
steady.
* ECF-2 CALIBRATION OF ZERO
Press the key
Press the key
Press the key
* CALIBRATION OF WEIGHT (SPAN)
Press the key
Press the keys
Pulsar la tecla
Pulsar la tecla
Place the weight of calibration on the platform and press the key
stable.

10. TECHNICAL PARAMETERS

DO NOT MODIFY THE TECHNICAL PARAMETERS IF IT IS NOT STRICTLY NEEDED. A BAD CONFIGURATION OF THIS SECTION
CAN CAUSE A WRONG FUNCTIONING OF THE SCALE.
ENTRANCE AND EXIT OF THE CALIBRATION
DISPLAY
LF 1
46
or to select the desired function:
,the display will show CALZ.
,to put the reading of the display to zero.
and to move the cursor.
to introduce the value of the weight of calibration.
, the display will show CALZ.
, to put the reading of the display to zero.
, to calibration.
, the display will show the value of the weight of calibration.
and to move the cursor.
to modify the value of the weight of calibration.
to confirm.
• With the visor switched off, press and hold the key
screen, then you can release the key
• With the keys ,
• Press the key to start or the key
automatically.
and
ECF-1, ECF-2 or ECF-3
to do the calibration once the reading is
to do the calibration once the reading is
DESCRIPTION AND SEQUENCE OF USE
.
and introduce the code 0020.
to exit the menu and the indicator will begin again
USER'S MANUAL BR15
ECF-1
, the message is going to appear
until the message P000, appears on the
EN