seeger SAC9000S Mode D'emploi page 8

Uneven surface
ATTENTION
Install the device in rooms of at least 9 m².
Do not install the device in a place where there are flammable gases.
NOTE!
The manufacturer may provide other appropriate examples or
additional information on the smell of the refrigerant.
4.3 EXHAUST PIPE FIXATION
The air conditioner must be connected to the outside through a duct so that the return
air can escape from the room, which contains the waste heat and moisture of the unit.
Step 1: Connect the pipe connector to the end of the return air hose.
Step 2: Connect the window adapter to the other end of the exhaust pipe.
8
ENG